
LENGTH: | 10.3" |
CALIBER: | 5.56MM |
COLOR: | DDC |
LOWER RECEIVER: | Super Duty Lower Mil-Spec |
UPPER RECEIVER: | Super Duty M4 Upper |
BCG: | Reliability Enhanced Bolt Carrier Group |
BOLT: | Geissele Stressproof Bolt |
RAIL | 9.3" SMR MK16 w/ Geissele Center Tab |
TRIGGER: | SSA-E X w/ Lightning Bow® |
BARREL: | 10.3" Barrel, CHF, Chrome Lined, 1-7 Twist - Geissele Profile |
GAS SYSTEM: | Geissele Length |
GAS BLOCK: | Super Compact Gas Block |
CHARGING HANDLE: | Airborne Charging Handle |
MUZZLE: | Nanocoated Surefire Closed-Tine Flash Hider |
LOWER PARTS KIT: | Ultra Duty Lower Parts Kit |
BUFFER: | Mil-Spec 6 Position, 7075-T6 |
BUFFER ASSEMBLY: | Super-42 w/ H3 Buffer |
STOCK: | SB Tactical SBA3 |
GRIP: | Geissele Grip |
What is Geissele Nanoweapon?
Geissele Nanoweapon (also known as Picatinny DSL) is a family of Durable Solid Lubricant coatings which was developed by ARDEC. It is available exclusively from Geissele Automatics. We continued the development of Picatinny DSL so that its level of corrosion, wear and abrasion resistance is currently unmatched among firearm coatings. Nanoweapon is applied at low temperatures so that the underlying metallurgy of the part is non effected by the application process. Our coating also has a surface hardness roughly equivalent to synthetic diamond. This makes Geissele Nanoweapon harder than sand, easily rejecting carbon and making cleaning a breeze, on top of allowing the firearm to operate normally with less lubrication.
Geissele DDC (Desert Dirt Color) Disclaimer
Geissele DDC, or Desert Dirt Color, refers to the variety of shades of desert terrain. Differing shades of DDC are desired on a military small arm to breakup the outline of the weapon.
These colors can vary from color seen in the picture of the product, and can also vary from each other when comparing one product to another product. So it is possible that your accessory rails will not match exactly to your rail. Please see pictures below of several examples of DDC. Please note that even the product you receive may vary slightly from these examples shown.
Due to the chemical process that takes place during Type 3 Hardcoat, the finish on the product can vary from one to the next, even if it is the same batch. The only way to receive a uniform finish on all parts and accessories to match a color you desire, is to have it recoated or painted with a different finish, for example Cerakote ™ or DuraCoat. However please be aware, that these other types of finishes will not be as durable and will be more easily prone to scratches and scrapes.